مطالعه تجربی تاثیر نانوماده CNT و دما بر خواص مکانیکی در شرایط مختلف محیطی قطعات تولید شده ABS با فرایند ساخت افزودنی به روش FDM
نام نخستين پديدآور
شاهین فرهت
وضعیت نشر و پخش و غیره
نام ناشر، پخش کننده و غيره
فنی مهندسی مكانیک (پردیس)
تاریخ نشرو بخش و غیره
۱۴۰۰
مشخصات ظاهری
نام خاص و کميت اثر
۸۱ص.
مواد همراه اثر
سی دی
یادداشتهای مربوط به پایان نامه ها
جزئيات پايان نامه و نوع درجه آن
کارشناسی ارشد
نظم درجات
مهندسی مكانیک گرایش ساخت و تولید
زمان اعطا مدرک
۱۴۰۰/۱۱/۲۵
یادداشتهای مربوط به خلاصه یا چکیده
متن يادداشت
چكیده: مدلسازی در ساخت افزودنی به روش FDM یكی از مهمترین فناوریهای چاپگر سهبعدی است. این روش با توجه به ویژگیهای آن، از جمله قالب ریزی آزاد، ساخت ساختار پیچیده که با روشهای دیگر امكان پذیر نیست و سرعت بخشیدن به تولید، توجه بیشتری به خود جلب کردهاست. با اینكه پژوهشهای گستردهای در این رابطه انجام شدهاست، اما در زمینه توسعه مواد اولیه و بررسی استحكام مكانیكی قطعات تولید شده در شرایط مختلف محیطی در فرایند ساخت افزودنی به روش FDM مطالعات محدودی صورت گرفتهاست. دراین تحقیق نمونههایی متشكل از ABS و ABS/CNT با روش اختلاط ذوبی با هم مخلوط شده و سپس نسبتهای مختلف CNT بهصورت فیلامنت تهیه شد. نمونه تهیه شده با هدف مطالعه تجربی تاثیر CNT و تاثیر دما بر خواص مكانیكی قطعات پرینت شد. مشخص شد قطعات پرینت شده از جنس ABS خالص در دمای ۲۵۰ دارای بهترین خواص مكانیكی میباشد. پس از افزودن 1/0، 3/0 و 5/0 درصد CNT به ABS و پرینت در دمای ۲۵۰ درجه سانتیگراد مشخص شد نمونه دارای ۳/۰ افزودنی دارای بهترین خواص مكانیكی میباشد. همچنین تاثیر قرارگیری قطعه در محیطهای مرطوب بر خواص مكانیكی مورد بررسی قرار گرفت .نمونه حاوی CNT مقاومت بهتری در برابر محیط مرطوب از خود نشان داده و کیفیت خود را حفظ نمود.
متن يادداشت
Abstract: Fused deposition modeling (FDM) process is one of the most important technologies of 3D printers which is based on additive manufacturing method. This method has attracted more attention due to its features, including free molding, construction of complex structures that are not possible with other methods, and speeding up production. Although extensive research has been done in this regard, in the field of raw material development and the study of mechanical strength of parts produced in different environmental conditions in the process of making additives by FDM method has been limited. In this study, samples consisting of ABS and ABS/CNT were mixed by fusion mixing method and then different CNT ratios were prepared as filament. The sample was printed for the purpose of experimental study of the effect of CNT and the effect of temperature on the mechanical properties of samples. It was found that printed parts made of pure Abs at 250 ° C have the best mechanical properties. After adding 0.1, 0.3 and 0.5% CNT to ABS and print at 250 ° C, it was found that the sample with 0.3 additive had the best mechanical properties. Also, the effect of placing the printed part in humid environments on mechanical properties was investigated. The sample containing CNT showed better resistance to humid environment and maintained its quality.
عنوانهای گونه گون دیگر
عنوان گونه گون
Experimental study on the effect of CNT nanomaterials and temperature on mechanical properties in different environmental conditions of ABS parts produced by FDM additive manufacturing process
نام شخص به منزله سر شناسه - (مسئولیت معنوی درجه اول )