عنوان

Corrosion-under-insulation (CUI) guidelines /

(Number (ISBN

1845694279

(Number (ISBN

9781845694272

Erroneous ISBN

1420076035

Erroneous ISBN

1845694236

Erroneous ISBN

9781420076035

Erroneous ISBN

9781845694234

Number

b755916

Title Proper

Corrosion-under-insulation (CUI) guidelines /

General Material Designation

[Book]

First Statement of Responsibility

[edited by] S. Winnik.

Place of Publication, Distribution, etc.

Cambridge, England :

Name of Publisher, Distributor, etc.

Woodhead,

Date of Publication, Distribution, etc.

2008.

Specific Material Designation and Extent of Item

1 online resource (xvii, 153 pages) :

Other Physical Details

illustrations.

Series Title

European Federation of Corrosion publications,

Series Title

Woodhead publishing in materials

Volume Designation

no. 55

ISSN of Series

1354-5116 ;

Text of Note

"Published for the European Federation of Corrosion by Woodhead Publishing and Maney Publishing on behalf of the Institute of Materials, Minerals & Mining."

Text of Note

Includes bibliographical references.

Text of Note

Cover; Corrosion-under-insulation (CUI) guidelines; Copyright; Contents; European Federation of Corrosion (EFC) publications: Series introduction; Volumes in the EFC series; Abbreviations; Dedication; 1Introduction; 1.1 Purpose of the document; 1.2 References; 2Economic consideration; 2.1 Statistical analysis; 2.2 Size of the issue; 2.3 Key performance indicators; 3Ownership and responsibility; 3.1 Senior management; 3.2 Engineering manager; 3.3 Maintenance; 3.4 Operations; 3.5 Inspection; 3.6 Members of a project team; corrosion-under-insulation programme.

Text of Note

4The risk-based inspection methodology for corrosion-under-insulation4.1 Introduction; 4.2 Unit level prioritisation; 4.3 Challenging the need for insulation; 4.4 Data validation; 4.5 Using risk-based inspection to design corrosion-under-insulation inspection plans; 4.6 Reference; 5Inspection activities and strategy; 5.1 General considerations; 5.2 Typical locations on piping circuits susceptible to corrosion-under-insulation; 5.3 Typical locations on equipment susceptible to corrosion-under-insulation; 5.4 Examples of a risk-based inspection plan.

Text of Note

6Non-destructive examination and testing screening techniques for corrosion-under-insulation6.1 Non-destructive examination and testing techniques; 6.2 Reference; 7Recommended best practice to mitigate corrosion-under-insulation; 7.1 Background; 7.2 Current corrosion-under-insulation prevention methods; 7.3 How to achieve a life expectancy of over 25 years; 7.4 Benefits of thermally sprayed aluminuim; 7.5 Use of personnel protective guards; 7.6 Use of aluminium foil to mitigate chloride external stress corrosion cracking of austenitic stainless steel; 7.7 References.

Text of Note

8Design for the prevention of corrosion-under-insulation8.1 Introduction; 8.2 Challenge the requirement for insulation; 8.3 Plant layout; 8.4 Mechanical considerations: equipment and tanks; 8.5 Mechanical considerations: piping; 8.6 Materials of construction; 8.7 Coatings and wrappings; 8.8 Insulation; 8.9 Weatherproofing; 8.10 References; 9Appendix overview; Appendix A: Cost-economic evaluation; Appendix B: Quality assurance; Appendix C: Additional guidelines on the implementation of corrosion-under-insulation best practice; C.1 Maintenance and remediation issues; C.2 Minimum standards.

Text of Note

C.3 Types of insulation serviceC. 4 Surface preparation; C.5 References; Appendix D: Coatings; D.1 General comments; D.2 Protective coatings; D.3 Thermally sprayed aluminium; D.4 Surface and moisture tolerance; D.5 Alternative coatings; tape coatings; D.6 Reference; Appendix E: Application of thermally sprayed aluminium; E.1 Application of thermally sprayed coatings; E.2 Use of organic topcoats; E.3 Application strategies; E.4 Thermally sprayed aluminium specification; E.5 Definitions; E.6 Referenced codes, standards and specifications; E.7 Coating philosophy; E.8 Coating system.

0

8

8

8

8

Text of Note

Corrosion under insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. The European Federation of Corrosion (EFC) Working Parties WP13 and WP15 have worked to provide guidelines on managing CUI together with a number of major European refining, petrochemical and offshore companies including BP, Chevron-Texaco, Conoco-Phillips, ENI, Exxon-Mobil, IFP, MOL, Scanraff, Statoil, Shell, Total and Borealis. The guidelines within this document are intended for use on all plants and installations that contain insulated vessels, piping and equipment. The guidelines cover a risk-based inspection methodology for CUI, inspection techniques (including non-destructive evaluation methods) and recommended best practice for mitigating CUI, including design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials and protection guards. The guidelines also include case studies. Guidelines cover inspection methodology for CUI, inspection techniques, including non-destructive evaluation methods and recommended best practiceCase studies are included illustrating key points in the book.

Title

Corrosion-under-insulation (CUI) guidelines.

International Standard Book Number

9781420076035

Insulation (Heat)

Piping-- Corrosion.

Insulation (Heat)

Piping-- Corrosion.

Rörarbete-- korrosion.

Värmeisolering.

Number

Edition

Class number

Book number

Winnik, S., (Stefan)

European Federation of Corrosion.

Institute of Materials, Minerals, and Mining.

Date of Transaction

20201204161117.0

Cataloguing Rules (Descriptive Conventions))

pn

Electronic name

[Book]

Y